Correlated courses in woodwork and mechanical drawing
Ira Samuel Griffith

THE CLASSIC COLLECTION · 1916
"Carpentry" by Ira Samuel Griffith is a practical guide on the fundamentals of carpentry written in the early 20th century. The text serves as an elementary treatise intended for apprentices, vocational and trade school students, highlighting essential techniques and principles of carpentry, with a focus on roof framing and structural integrity. At the start of "Carpentry," the author introduces the importance of foundational work in carpentry, emphasizing the role of carpenters in laying out foundations alongside masons. Griffith discusses the tools required for accurate measurements, such as the builder's transit and the Y-level, detailing how to properly establish a building site's grade line. He outlines the processes for excavating foundations, constructing footings, and selecting appropriate materials, providing a thorough overview of foundational principles essential for successful carpentry projects.
Introduction adapted from the source catalogue; source summaries may be automatically generated.
Free to read · English · 37,365 words · No account needed
MAKE TIME FOR A GOOD BOOK
On by default. Untick to stop anonymous reading totals. Each page counts after 10 seconds in view. How this works.
Anonymous counting is on unless you have switched it off.
============================================================ Degrees | Sine | Tangent | Cotangent| Cosine | ----------+---------+---------+----------+----------+------- 0 | 0 | 0 | ∞ | 1 | 90 1 | .0175 | .0175 | 57.2900 | .9998 | 89 2 | .0349 | .0349 | 28.6363 | .9994 | 88 3 | .0523 | .0524 | 19.0811 | .9986 | 87 4 | .0698 | .0699 | 14.3007 | .9976 | 86 ----------+---------+---------+----------+----------+------- 5 | .0872 | .0875 | 11.4301 | .9962 | 85 ----------+---------+---------+----------+----------+------- 6 | .1045 | .1051 | 9.5144 | .9945 | 84 7 | .1219 | .1228 | 8.1443 | .9925 | 83 8 | .1392 | .1405 | 7.1154 | .9903 | 82 9 | .1564 | .1584 | 6.3138 | .9877 | 81 ----------+---------+---------+----------+----------+------- 10 | .1736 | .1763 | 5.6713 | .9848 | 80 ----------+---------+---------+----------+----------+------- 11 | .1908 | .1944 | 5.1446 | .9816 | 79 12 | .2079 | .2126 | 4.7046 | .9781 | 78 13 | .2250 | .2309 | 4.3315 | .9744 | 77 14 | .2419 | .2493 | 4.0108 | .9703 | 76 ----------+---------+---------+----------+----------+------- 15 | .2588 | .2679 | 3.7321 | .9659 | 75 ----------+---------+---------+----------+----------+------- 16 | .2756 | .2867 | 3.4874 | .9613 | 74 17 | .2924 | .3057 | 3.2709 | .9563 | 73 18 | .3090 | .3249 | 3.0777 | .9511 | 72 19 | .3256 | .3443 | 2.9042 | .9455 | 71 ----------+---------+---------+----------+----------+------- 20 | .3420 | .3640 | 2.7475 | .9397 | 70 ----------+---------+---------+----------+----------+------- 21 | .3584 | .3839 | 2.6051 | .9336 | 69 22 | .3746 | .4040 | 2.4751 | .9272 | 68 23 | .3907 | .4245 | 2.3559 | .9205 | 67 24 | .4067 | .4452 | 2.2460 | .9135 | 66 ----------+---------+---------+----------+----------+------- 25 | .4226 | .4663 | 2.1445 | .9063 | 65 ----------+---------+---------+----------+----------+------- 26 | .4384 | .4877 | 2.0503 | .8988 | 64 27 | .4540 | .5095 | 1.9626 | .8910 | 63 28 | .4695 | .5317 | 1.8807 | .8829 | 62 29 | .4848 | .5543 | 1.8040 | .8746 | 61 ----------+---------+---------+----------+----------+------- 30 | .5000 | .5774 | 1.7321 | .8660 | 60 ----------+---------+---------+----------+----------+------- 31 | .5150 | .6009 | 1.6643 | .8572 | 59 32 | .5299 | .6249 | 1.6003 | .8480 | 58 33 | .5446 | .6494 | 1.5399 | .8387 | 57 34 | .5592 | .6745 | 1.4826 | .8290 | 56 ----------+---------+---------+----------+----------+------- 35 | .5736 | .7002 | 1.4281 | .8192 | 55 ----------+---------+---------+----------+----------+------- 36 | .5878 | .7265 | 1.3764 | .8090 | 54 37 | .6018 | .7536 | 1.3270 | .7986 | 53 38 | .6157 | .7813 | 1.2799 | .7880 | 52 39 | .6293 | .8098 | 1.2349 | .7771 | 51 ----------+---------+---------+----------+----------+------- 40 | .6428 | .8391 | 1.1918 | .7660 | 50 ----------+---------+---------+----------+----------+------- 41 | .6561 | .8693 | 1.1504 | .7547 | 49 42 | .6691 | .9004 | 1.1106 | .7431 | 48 43 | .6820 | .9325 | 1.0724 | .7314 | 47 44 | .6947 | .9657 | 1.0355 | .7193 | 46 ----------+---------+---------+----------+----------+------- 45 | .7071 | 1.0000 | 1.0000 | .7071 | 45 ----------+---------+---------+----------+----------+------- | Cosine |Cotangent| Tangent | Sine |Degrees ----------+---------+---------+----------+----------+-------
Example 6.--sin = .5150, find the angle.
Solution--Looking in columns 2 and 5 (sine values from 0-90 degrees) Ans. 31 degrees (Columns 2 and 1).
Example 7.--cot = 1.3764, find the angle.
Solution--Looking in columns 3 and 4, Ans. = 36 degrees.
=Interpolation.=--Frequently one must find a functional value for fractional degrees, or degrees and minutes. Also, it becomes necessary to find the value of an angle with greater accuracy than even degrees, as given in the table herewith. This process of finding more accurate values is known as interpolation.
Example 8.--Find the value of tan 50 degrees 20 min.
Solution.--tan 50 degrees = 1.1918
tan 51 degrees = 1.2349
difference for an interval of 1 degree = .0431
20 min. = 20/60 = 1/3 of 1 degree; ⅓ of .0431 = .0144
tan 50 degrees 20 min. = 1.1918 + .0144 = 1.2062.
The value of a fractional degree would be similarly treated for the sine, these functions increasing as the value of the angle increases. The cosine and cotangent, however, decrease in value as the angle increases. For this reason the fractional value of the cosine and cotangent must be subtracted from, instead of added to, the value of the function of the next lower number of degrees.
Example 9. Find the value of cos 26 deg. 30 min.
Solution--cos 26 deg. = .8988
cos 27 deg. = .8910
difference for interval of 1 deg. = .0078
30 min. = ½ of 1 deg.; ½ of .0078 = .0039
cos. 26 deg. 30 min. = .8988 - .0039 = .8949.
Example 10.--Find the angle whose tan is .5
Solution--From the table, .4877 = tan 26 deg. .5095 = tan 27 deg. difference for interval of 1 deg. = .0218 .5000 = tan angle X. .4877 = tan 26 deg. difference for interval between tan angle X and tan 26 deg. = .0123 123/218 of 1 deg. or 60 min. = 34 min. Therefore, angle whose tangent = .5 = 26 deg. 34'.
Your reading position is saved on this browser. Take it to another device with a library code. Reading pages adapt to text, rather than matching a printed edition.
BEHIND THE BOOK
This eBook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org. If you are not located in the United States, you will have to check the laws of the country where you are located before using this eBook. Read the source licence.
The original source file, including credits and licence, is retained by this library. Request an original-format copy at no charge. Please include the book title and Project Gutenberg identifier #70226.
KEEP YOUR CURIOSITY GOING

Charles G. (Charles Griffith) Ross
Hannah Webster Foster

Emily Lawless
Edwin Hamlin Carr

Charles De Lano Hine
Andrew Ure